Insulated Roller Shutters


Insulated steel roller shutters


Our insulated steel roller shutters are suitable for various commercial and industrial applications including factories, warehouses, loading bays or wherever security and some form of thermal requirement to increase the performance of your premises is needed. They can be installed inside or out, and in the correct configuration can provide completely unobstructed access when open. All of our curtains, double skinned and interlocked horizontally with a lightweight insulated core, are tested up to Class 5 for wind resistance, this is achieved through our wide variety of end locks and channel guides meaning even the widest of shutters perform well in even the worst of weather. Every shutter is made using galvanized material and can be left in this standard finish state or powder coated to a colour of your choice from the large RAL or BS selection in our in-house powder coating plant. As every shutter is custom made and assembled in our factory, we can provide further options for this type of door such as vision and a variety of motors to suit your requirements and supply.

Twin 100mm galvanised steel interlocking laths with endlocks to prevent lateral movement with a lightweight insulated core, optional vision available

Yellow bottom rubber carrier and seal

Heavy-duty seamless tube mounted between M.S. plates

Heavy M.S. rolled angle or box section guides bolted/welded to roller end plates

80mm folded galvanised steel channels 

Tubular electric motor, single phase 240v with integrated limit switch (standard) or 24v DC motor incorporating a built-in battery back-up or 3ph direct drive motor (with incorporated brake) or 1ph/3ph flange mounted motor with integrated limit switch

Emergency override manual crank handle (standard) or battery back-up, or chain override

Safety brake to suit size and weight (not applicable to direct drive motors)

Optional extras unless required by current legislation

Keyswitch (optional)

Push buttons (optional)

 Rockerswitch (optional)

Remote (optional)

Group controller (optional - where more than one door is present)

Standard galvanised finish or powder coated any colour from our standard range


18dB (estimated sound) reduction value

Up to Class 5