Domestic

75mm 0.7mm (standard) gauge, 0.9mm or 1.2mm gauge galvanised steel interlocking laths with endlocks to prevent lateral movement, 75mm perforated, 75mm punched, tube and link or stainless steel
Roll formed 1.6mm T-section or L-section, optional rubber strip
Heavy-duty seamless tube mounted between M.S. plates
Heavy M.S. rolled angle or box section guides bolted/welded to roller end plates
65mm folded galvanised steel channels as standard, with an optional extra for larger or smaller sizes or wind guides at either 65mm or 100mm
Tubular electric motor, single phase 240v with integrated limit switch (standard) or 24v DC motor incorporating a built-in battery back-up or 3ph direct drive motor (with incorporated brake) or 1ph/3ph flange mounted motor with integrated limit switch
Emergency override manual crank handle (standard) or battery back-up, or chain override
Safety brake to suit size and weight (not applicable to direct drive motors)
Optional extras unless required by current legislation
Keyswitch (optional)
Push buttons (optional)
Rockerswitch (optional)
Remote (optional)
Group controller (optional - where more than one door is present)
Standard galvanised finish or powder coated any colour from our standard range
Up to Class 5
Product
Steel roller shutters
Our standard roller shutters are suitable for various commercial and industrial applications including factories, warehouses, loading bays or wherever security is required across an opening. They can be installed inside or out, and in the correct configuration can provide completely unobstructed access when open. All of our curtains, interlocked horizontally, are tested up to Class 5 for wind resistance, this is achieved through our wide variety of end locks and channel guides meaning even the widest of shutters perform well in even the worst of weather. Every shutter is made using galvanized material and can be left in this standard finish state or powder coated to a colour of your choice from the large RAL or BS selection in our in-house powder coating plant. As every shutter is custom made and assembled in our factory we can provide a further selection of curtains, one of which will surely suit your needs, such as plastisol, perforated, punched, stainless steel or tube and link. Some of these are ideally suited where airflow, from an underground car park, or visibility, through a shopfront, are necessary. We also offer a range of operation from manually operated, push/pull or chain hoist, to electrically operated with a motor to suit your requirements and supply.
Product
Aluminium roller shutters
Our insulated steel roller shutters are suitable for various commercial and industrial applications including factories, warehouses, loading bays or wherever security and some form of thermal requirement to increase the performance of your premises is needed. They can be installed inside or out, and in the correct configuration can provide completely unobstructed access when open. All of our curtains, double skinned and interlocked horizontally with a lightweight insulated core, are tested up to Class 5 for wind resistance, this is achieved through our wide variety of end locks and channel guides meaning even the widest of shutters perform well in even the worst of weather. Every shutter is made using galvanized material and can be left in this standard finish state or powder coated to a colour of your choice from the large RAL or BS selection in our in-house powder coating plant. As every shutter is custom made and assembled in our factory, we can provide further options for this type of door such as vision and a variety of motors to suit your requirements and supply.

From 39mm up to 77mm foam filled aluminium interlocking laths with endlocks to prevent lateral movement
Bottom rubber carrier and seal
Heavy-duty octagonal tube mounted between plates
Heavy M.S. rolled angle or box section guides bolted/welded to roller end plates
Tubular electric motor, single phase 240v with integrated limit switch (SR2 only) or or 3ph direct drive motor (with incorporated brake) or 1ph/3ph flange mounted motor with integrated limit switch
Emergency override manual crank handle
Safety brake to suit size and weight
Hood as standard
Keyswitch (optional)
Push buttons (optional)
Rockerswitch (optional
Standard galvanised finish or powder coated any colour from our standard range

45mm thick, 1.2mm magnelis steel construction, double skinned with interlocking seams reinforced with integral stiffeners, integrated caps top and bottom, astragal and a Rockwool core.
1.6mm magnelis steel, formed to single or double rebated profiles in welded or knock down form, reinforced and fitted with adjustable fixings for quick alignment. Standard frame size is 120mm but can be manufactured to as narrow as 80mm
Stainless steel dog bolt
Various styles of threshold available including flat, double ramped or rebated with either squared or chamfered back for external doors, with internal doors supplied cill free unless specifically requested.
Factory finished powder coating from our standard range, specialist colours and marine grade finishes available
2.1W/m²K
35kg/m²
Personnel (mortice, lock, levers) or escape doors (panic latch)
Product
Insulated Steel Hinged Doors
Our insulated steel hinged doors have an appearance that enable them to be used commercially, industrially or even domestically, equally at home in industrial units, factories, schools, hospitals, or garages/out-buildings. All of our insulated steel hinged doors are custom made using magnelis steel which offers superior resistance to corrosion when compared with similar Zintec models, with a flexible design allowing them to be manufactured to almost any individual requirement. Our standard construction options include single or double leaf operation, equally or unequally split, and has been verified as having a u-value of 2.1 W/m²K through third party accreditation by Element. They are extremely robust as standard and lend themselves to being compatible with almost any locking system required
Product
Steel Hinged Doors
Our steel hinged doors have an appearance that enable them to be used commercially, industrially or even domestically, equally at home in industrial units, factories, schools, hospitals, or garages/out-buildings. All of our steel hinged doors are custom made using magnelis steel which offers superior resistance to corrosion when compared with similar Zintec models, with a flexible design allowing them to be manufactured to almost any individual requirement. Our standard construction options include single or double leaf operation, equally or unequally split, with options such as vision, louvred or combined with an over-panel or side-panel. They are extremely robust as standard and lend themselves to being compatible with almost any locking system required.

45mm thick, 1.2mm magnelis steel construction, double skinned with interlocking seams reinforced with integral stiffeners, integrated caps top and bottom, astragal and a Dufaylite core.
1.6mm magnelis steel, formed to single or double rebated profiles in welded or knock down form, reinforced and fitted with adjustable fixings for quick alignment. Standard frame size is 120mm but can be manufactured to as narrow as 80mm
Stainless steel dog bolt
Various styles of threshold available including flat, double ramped or rebated with either squared or chamfered back for external doors, with internal doors supplied cill free unless specifically requested.
Factory finished powder coating from our standard range, specialist colours and marine grade finishes available
N/A
35kg/m²
Personnel (mortice, lock, levers) or escape doors (panic latch)